Electrical Safety; Device-Specific Safety Instructions - KALEAS LDM 500-80+ Operating Instruction

LDM 500-80 +
 Use ordinary posture when using the device. Maintain proper foot-
ing and balance at all times, thus allowing you to better control the
device in unexpected situations.
 Pay attention when using the device, and do not become distract-
ed. Do not operate the device if you are tired or under the influence
of drugs, alcohol or medicine. One moment of inattention when
using the device can result in serious injuries.
 Do not leave the device unattended; switch it off after use.
! Observe the safety instructions, guidelines, occupational safety
and accident prevention regulations as well as protection policies
applicable to your job and workplace.

Electrical safety

 Do not operate the device in a damp or wet environment.
 Remove the battery if the device will not be used for an extended
period.
 Utilize only batteries, power packs and system voltage intended for
use in this specific device. Otherwise, the device may pose a fire
hazard.

Device-specific safety instructions

Use the device and related accessories only according to the in-
!
tended use as well these instructions.
! Before using, check the device for possible damage. Do not use it
if the safety is in doubt.
 Ensure the device is protected when storing it and out of the reach
of children.
 Protect the device against moisture, corrosive substances, direct
sunlight, extreme temperatures and wide temperature fluctuations.
 Avoid heavy vibrations or jolts, and never drop the device or use
force.
 Keep the device away from electromagnetic sources such as induc-
tion heating and electrical welding devices. Avoid static charges
since these may damage the device.
 Avoid accidentally switching on the device. Make sure it is switched
off when inserting batteries.
 Do not block openings on the device.
© KALEAS GmbH & Co. KG
ENGLISH
41