Addition (Plus) - KALEAS LDM 500-80+ Operating Instruction

LDM 500-80 +
2x
short
1x
short
1x
short
1x
short
 It is essential that you observe the set reference and do not change
it during the entire procedure.
 The computed result may also be greater than 80 m.

Addition (Plus)

The addition can be carried out with any of the units of measure-
ment (length, surface area, volume). You can also include the
measurement results of functions (surface area, volume, Pythago-
ras) in the addition. Only values of the same unit can be added. The
unit is established by the first measured value.
If the result of an addition is stored in the measured value memory,
the individual values of the sum are also stored.
 The computed result may also be greater than 80 m.
1x
short
1x
© KALEAS GmbH & Co. KG
ENGLISH
The segment measurement is activated.
 Display [6]
 Display [2]
Setting the desired segment distance
Every time the buttons are pressed, the value is
increased / decreased by the smallest set unit.
If you continuously press the buttons, the value to be
set is changed more quickly.
Applying the set segment value
The laser [B] is activated, and the continuous segment
measurement is started.
 Display [4]
 Display [2]
 Display [3]
Restarting the segment measurement
Measuring value 1 (distance/surface area/volume)
 Display [4]
Initiating an addition
Last segment distance used
Distance from the next multiple of
the set segment value
Set segment value
Next multiple
of the set segment value
Value 1
35