Chapter 2: Preparing For The Installation - Datavan Saturn Series User Manual

PREPARING FOR THE INSTALLATION
Preparing For the Installation
Before you start installing Touch Terminal, read the following instructions.
• Saturn Series do not support PCI slot.
• Do not insert or remove any device or component from the Saturn Series while the power is
turned on.
• If using Saturn Series in a dusty environment, clean the Touch Terminal regularly.
• Only USB devices are Hot Swap capable. Be sure to turn off the power of the touch terminal
and the device before making any connection or disconnection.
• The spill proof design of Saturn Series conforms to IP65 standard (Front panel only).
• Always seek the help of authorized service personnel in disassembling the terminal. The
manufacturer will not be held responsible in the event of damage caused by an unauthorized
person.
• Before installation or disassembling of the terminal, ensure that the power is turned off.
Otherwise, electric shock may occur and may void the warranty.
• For systems preloaded with POSReady/Windows Embedded on the storage(O/S pre-
installed as an option), the manufacturer provides recovery image. System Integrator shall
take care of software restoration after having an image recovery. A manufacturer-supplied
USB interface COMBO drive will be required for such action. Other brands of COMBO drive
may require a specific driver. Please use the recovery image for rescue operation only.
Using it otherwise may wipe out whatever is stored in the storage. Then follow the
instructions from your system integrator for software recovery.
20
Chapter 2