Laser Range Finder & Camera Kit - Barco UDX Installation Manual

Laser range finder &
camera kit
Purpose of the laser range finder & camera kit
Barco provides a kit with a laser range finder and USB camera to help measure the distance from the front of
the projector to the projected surface. And this by the simple press of a button.
This kit is specifically made for the UDX and thus cannot be used for other equipment.
How to use the laser range finder
Place the projector with laser range finder and point it towards the desired projected surface.
Press the push button to activate the laser and read the distance from the display. The laser will be active for
30 seconds.
In order to switch the unit of measurement, press the push button for 3 seconds. You can choose between
meters and feet.
WARNING: Laser Radiation — Do not stare into laser ranging beam, Class 2 IEC EN 60825-1:2014
8
R5906113 /08 UDX 87