Input Source Connections - Sfp Input Board - Barco UDX Installation Manual

2D
2D
2D
Active
3D
Active
3D
Active
3D
Active
3D
Passive
stereo
Passive
stereo
Native video •
timings
•
•
6.7 Input source connections – SFP Input Board
The Barco SFP Input Board has been designed and tested to work alongside the Barco SFP Output
Board.
However, it is possible that the SFP Input board can also work with other third-party devices that
support 12G over fiber. Due to the many third-party options available on the market, the input board
could not be tested for every option available.
SFP input board
To connect 12G SDI over fiber.
The input board is delivered without any connector. It is up to the customer to buy the necessary connectors,
transceivers and cables. These parts can be mounted on the indicated places on the front panel of the board.
2 column mode (2x1
layout)
4 quadrant mode (2x2
layout)
4 column mode (4x1
layout)
Standard layout (1x1
layout)
2 column mode (2x1
layout)
4 quadrant mode (2x2
layout)
4 column mode (4x1
layout)
Standard layout (1x1
layout)
2 column mode (2x1
layout)
UDX-U-series: 1600 x 1200 @60 Hz
UDX-W-series: 1920 x 1200 @60 Hz
UDX-4k-series: 3840 x 2400 @60 Hz
Input & Communication
• 1920 x 2160 @60 Hz
• 1920 x 2160 @120 Hz
• 1920 x 2400 @60 Hz
• 2048 x 2160 @60 Hz
• 2048 x 2160 @120 Hz
• 960 x 1080 @120 Hz
• 960 x 1200 @120 Hz
• 1280 x 1080 @60 Hz
• 1280 x 1080 @120 Hz
• 1280 x 1600 @60 Hz
• 1280 x 1600 @120 Hz
• 1920 x 1080 @120 Hz
• 1920 x 1200 @120 Hz
• 2048 x 1080 @120 Hz
• 960 x 2160 @120 Hz
• 960 x 2400 @120 Hz
• 1024 x 2160 @60 Hz
• 1600 x 1200 @120 Hz
• 2560 x 1080 @120 Hz
• 2560 x 1600 @120 Hz
1920 x 2160 @120 Hz
• 1920 x 1080 @120 Hz
• 1920 x 1200 @120 Hz
• 2048 x 1080 @120 Hz
• 960 x 2160 @120 Hz
• 960 x 2400 @120 Hz
• 1024 x 2160 @120 Hz
3840 x 2160 @60 Hz
1920 x 2160 @60 Hz
R5906113 /08 UDX 69