Advertisement
HOW TO INSTALL AND REPLACE BATTERIES INTO THE RAIN SENSOR
(OPTIONAL- SOLD SEPERATELY)
To install and replace the batteries, please follow the steps below:
1.
Unlock the main cover from the rain sensor base and remove the cover.
2.
Remove the battery cover at the top of the rain sensor.
3.
Insert 2 x AAA IEC LR3 1.5V batteries into the battery compartment, observing the
correct polarity.
4.
Replace the battery cover and the main cover on the unit.
Note: When changing batteries in any of the units, all units need to be reset by following
the setting up procedure. This is because the thermo-hygro sensor and rain sensor
(optional) assign a random security code at start-up and this code must be received and
stored by the Weather Centre in the first 135 seconds of power being supplied to it.
Note: The stored history records will not be retained after battery change or whenever
battery is removed from the Weather Centre.
FUNCTION KEYS:
Weather Centre:
The Weather Centre has 4 easy-to-use function keys.
Figure 1
SET key + key HISTORY key
Figure 2
MIN/MAX key
5
Figure 3
Advertisement
