Proper Use; Package Contents; Features And Equipment - Indexa DF-200 Operating Instructions Manual

Set, digital wireless observation camera
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
Operating instructions
GB
1. Introduction
Read through these operating instructions fully and carefully and while doing
so fold out page 3 with the illustrations. The operating instructions belong to
this product and contain important points concerning bringing the appliance
into service and its operation.
Always pay attention to all safety instructions. Should you have any questions
or be unsure about operating the appliance ask a specialist. Keep these
instructions in a safe place and should the need arise pass them on to a third
party.

2. Proper use

The digital wireless camera set consists of the camera DF-200K and receiver
DF-200E with two mains adaptors model KSAB0500100W1EU. It is to be used
for the surveillance of rooms, entrance hallways, driveways etc. through video
pictures and sound. The video and audio transmission is wireless using a
frequency of 2.4GHz.
The receiver can be connected to the video and audio inputs of a monitor, TV-set
or recorder.The power is supplied through the supplied mains adapters
connected to a 230VAC, 50Hz mains supply.
If there is sufficient light a colour picture will be transmitted. At low ambient
light levels the integrated Infrared LEDs are automatically switched on. In this
case the immediate area (within 8m indoors and 5m outdoors) will be
illuminated and the video picture switches to black and white mode for
improved light sensitivity. If the surveillance is specifically required in a dark
environment, then additional lighting should be installed.
Up to four wireless cameras DF-200K can be used with one receiver. The
camera channels can be manually selected or automatically displayed in
sequence if the scan mode is selected.
The wireless transmission is digital and on constantly changing frequencies
(frequency hopping) which are synchronised between the camera and the
receiver. Only the receiver which has been "paired" with the camera can receive
the synchronised signals. This security feature prevents access of the camera
signal by third parties.
The camera is weatherproof (Protection class IP44) and can be used not only
indoors but also in a location outdoors which is sheltered from direct rainfall.
The receiver and both mains adapters are for indoor use only and must be
protected from moisture. The set is for use in private households. A video
surveillance system does not replace your duty of care or supervision. Observe
the regulations concerning video surveillance in commercial and public areas.
Any other use or modification of the device is not authorised. No liability will be
accepted for consequential damages or for damages caused by improper use or
incorrect operation. No liability will be accepted for consequential damages
caused by any function or by malfunction. Unless any liability is specifically
required by law, claims for damages, in particular those for personal injury or
property damage caused by non-functioning or malfunctioning of the machine,
are excluded.
This appliance is not intended to be used by people (including children) with
restricted physical, sensory or mental capacities, or a lack of experience and/or
knowledge, unless they are supervised by, or receive instructions how to use the
appliance from a person responsible for their safety.

3. Package contents

!
DF-200K camera with connection cable to mains adapter
!
DF-200E receiver
!
Stand for receiver
!
2x Radial antenna 3dB
!
2x mains adapter 5VDC
!
AV-cinch cable
!
Cinch/BNC adapter
!
Camera bracket with screws and plugs
!
User manual

4. Features and Equipment

Camera DF-200K (s. Fig. A)
1
Camera
2
Metalhousing
3
U-bracket
4
U-bracket screws
5
Mains adapter connection
6
Inner housing
7
Antenna connection
8
Rubber flap
9
Power LED
10
Infrared LEDs
11
Daylightsensor
12
Connection-LED
13
"Pairing"-Button
14
Microphone
15
3 dB radial antenna
16
Triangular nut
17
Screws
18
Wing screw
19
Bracket
20
Mains adapter
21
Plugs
22
Screws
Receiver DF-200E (s. Fig. B)
23
Cinch/BNC-Adapter
24
AV-Cinch cable
25
Receiver
26
Antenna connection
27
Audio-/Video-output
28
Mainsadapter connection
29
Direction button
30
Menu button
GB
-21

Advertisement

Table of Contents
loading

Table of Contents