Installing The Software - Indexa DF210A Operating Instructions Manual

14.3 Installing the Software

The following procedure is for Windows XP, it may differ slightly in
Windows Vista.
Connect the monitor / receiver to the PC with the USB-cable,
installing the software.
!
Load the CD [43] into the CD-ROM drive of the PC. The setup screen will
appear automatically. If it does not, the double-click the CD/DVD symbol
to start the installation process manually.
!
Select the desired language and then click "OK".
!
Select the appropriate operating system and then click "OK".
!
Select the language use during the installation and confirm with "OK".
!
Click "Next>".
!
Accept the licence agreement and click "Next>".
!
Click "Next>" for default folder path. Alternatively click "Browse..." to
select a different folder and confirm this with "Next>".
before
!
Name the connection (default is "i-SEC-Guarding Recording" symbol) and
click "Next>" to select the standard start menu folder. Click on
"Browse..." to select a different folder.
!
Click on "Install".
!
Await the installation.
!
Click on "Next>".
GB - 39