Printing Pressure Adjustment - Ricoh JP3000 Service Manual

31 October 2001 PRINTING

3.7.3 PRINTING PRESSURE ADJUSTMENT

Purpose: To make better print results without decreasing the run length.
Standard: Within 10 ± 0.2 mm
[A]
[B]
C238R052.WMF
• Paper delivery unit (☛ 3.9.1)
1. Adjust the distance [A] to 10 ± 0.2 mm by turning the adjusting bolt [B].
2. Repeat the same procedure for the printing pressure spring at the non-
operation side.
3-19