Use; Turning The Appliance On/Off; Setting The Dhw Temperature; Anti-Frost"-Mode - Bosch TR2000T Series User And Installation Manual

Use

6 Use
2
Fig. 11 User interface
[1] Operating light
[2] On / Off switch
[3] Temperature selector
CAUTION: The first start-up of the appliance
must be carried out by an authorized
technician, which will provide the user with
all the necessary information to the best
working and handling of the device.
6.1

Turning the appliance on/off

Turn on
▶ Switch to „I".
Turn off
▶ Switch to „0".
6.2

Setting the DHW temperature

Once the water has reached the selected
temperature level, the appliance stops
heating up (the indicator switches off).
When the water temperature is below the
desired value, the appliance re-starts the
heating cycle (the indicator switches back
on) until it reaches the desired temperature
selected.
The water outlet temperature can be regulated until 70 °C.
Increasing the temperature
▶ Turn the temperature selector to the right.
12
1
3
6720821791-03. V 2
Decreasing the temperature
▶ Turn the temperature selector to the left.
6.2.1 „Anti-Frost"-mode -
In this mode, the hot water tank always starts, when the
temperature inside the hot water tank reaches 5 °C.
▶ Switch to „-".
6.3

Emptying the appliance

▶ Turn off the appliance from the electric supply.
DANGER: Burn risk!
Open a hot water tap to and verify the
temperature of the water in the appliance
before opening the safety valve.
▶ Wait until the water temperature
decreases in order to avoid burns or any
other damage.
▶ Switch off the water cutting valve and open a hot water tap.
▶ Open the safety valve (Fig. 12).
▶ Wait until the appliance is completely empty.
Fig. 12 Manual activation of the safety valve
TR2000T – 6 720 885 113 (2018/04)
6720643873-06.1V