Step - Vision Fitness R2600HRT Assembly Manual

PINK BAG
3

STEP

• Mount the upper handlebars to the
console mast using two lock washers
(M8) and two screws (M8x15L).
Tighten with the 5mm Allen wrench.
• Remove the four mounting screws from
the back of the console. Connect the
wire harness and heart rate wires that
come from the console mast into the
plugs located in the back of the console.
Make sure the 9-Volt battery is plugged
in and in place on the console. Attach
the console to the mast with the four
screws removed earlier.
Console Mast
Handlebar
3
STEP
6