Panasonic PRL Series Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Telephone
  5. PRL Series
  6. Service manual
Panasonic PRL Series Service Manual

Panasonic PRL Series Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
KX-PRLA20
(Handset)
(Charger Unit)
Configuration for each model
Model No
Base Unit
Handset
KX-PRL260 1 (PRL260) 1 (PRLA20)
KX-PRL262 1 (PRL260) 1 (PRLA20)
KX-PRD260 1 (PRD260) 1 (PRLA20)
KX-PRD262 1 (PRD260) 1 (PRLA20)
KX-PRLA20*
1 (PRLA20)
*KX-PRLA20 is also an optional accessory, which contains a
handset and a charger.
All manuals and user guides at all-guides.com
KX-PRL260
(Base Unit)
KX-PRD260
(Base Unit)
Charger Unit Expandable
Up to 6
1
Up to 6
Up to 6
1
Up to 6
1
Up to 6
Telephone Equipment
KX-PRL260B
Model No.
KX-PRL260W
KX-PRL262B
KX-PRL262W
KX-PRD260B
KX-PRD260W
KX-PRD262B
KX-PRD262W
KX-PRLA20B
KX-PRLA20W
PRL series : Link-to-Cell Docking Station
for iPhone
PRD series : Link-to-Cell Docking Station
for Smartphone
Black
B:
Version
W: White Version
(for U.S.A.)
© Panasonic System Networks Co., Ltd. 2014
Unauthorized copying and distribution is a violation
of law.
ORDER NO. KM41403803CE
F13

Advertisement

Table of Contents
loading

Related Manuals for Panasonic PRL Series

Summary of Contents for Panasonic PRL Series

  • Page 1 KX-PRD260B KX-PRD260W KX-PRLA20 KX-PRL260 KX-PRD262B (Base Unit) (Handset) KX-PRD262W KX-PRLA20B KX-PRLA20W PRL series : Link-to-Cell Docking Station (Charger Unit) KX-PRD260 for iPhone (Base Unit) PRD series : Link-to-Cell Docking Station Configuration for each model for Smartphone Model No Base Unit...
  • Page 2 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 WARNING This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.

  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 TABLE OF CONTENTS PAGE PAGE 10.1.11. Check Caller ID ------------------------------------- 43 1 Safety Precautions----------------------------------------------- 5 1.1. For Service Technicians --------------------------------- 5 10.1.12. Check BT Communication ------------------------ 44 2 Warning -------------------------------------------------------------- 5 11 Disassembly and Assembly Instructions--------------- 46 11.1.
  • Page 4 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 15.5. Circuit Board (Handset_Main) ------------------------ 78 15.5.1. Component View ------------------------------------ 78 15.5.2. Bottom View ------------------------------------------ 79 16 Exploded View and Replacement Parts List ----------- 80 16.1. Cabinet and Electrical Parts (Base Unit) ----------- 80 16.2.

  • Page 5: Safety Precautions

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 1 Safety Precautions 1.1. For Service Technicians • Repair service shall be provided in accordance with repair technology information such as service manual so as to prevent fires, injury or electric shock, which can be caused by improper repair work. 1.

  • Page 6: Suggested Pbf Solder

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 2.2.1. Suggested PbF Solder There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper (Sn+Ag+Cu), you can also use Tin and Copper (Sn+Cu), or Tin, Zinc, and Bismuth (Sn+Zn+Bi). Please check the manufacturer's specific instructions for the melting points of their products and any precautions for using their product with other materials.

  • Page 7: Specifications

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 3 Specifications █ Standard: █ Bit rate: DECT 6.0 (Digital Enhanced Cordless 1.152 Mbit/s (DECT) Telecommunications 6.0) 1.0 Mbit/s (Bluetooth) Bluetooth wireless technology 2.1+EDR █ Modulation: █ Number of channels: GFSK (Gaussian Frequency Shift Keying) 60 Duplex Channels (DECT) █...

  • Page 8: Technical Descriptions

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4 Technical Descriptions 4.1. US-DECT Description The frequency range of 1.92 GHz-1.93 GHz is used. Transmitting and receiving carrier between base unit and handset is same frequency. Refer to Frequency Table (P.62). 4.1.1.

  • Page 9: Signal Flowchart In The Radio Parts

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.1.3. Signal Flowchart in the Radio Parts Reception Base unit: A voice signal from TEL line is encoded to digital data and converted into a 1.9 GHz modulated radio signal by BBIC(IC501). The RF signal, after which is amplified in BBIC, is fed to selected antenna.

  • Page 10: Block Diagram (Base Unit_Main)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.2. Block Diagram (Base Unit_Main)

  • Page 11: Tel Interface Circuit

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.3. Tel Interface Circuit...

  • Page 12: Block Diagram (Base Unit_Rf Part)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.4. Block Diagram (Base Unit_RF Part)

  • Page 13: Circuit Operation (Base Unit)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.5. Circuit Operation (Base Unit) General Description: (BBIC, Flash Memory, EERROM) is a digital speech/signal processing system that implements all the functions of speech compression, record and playback, and memory management required in a digital telephone answering machine. The BBIC system is fully controlled by a host processor.

  • Page 14: Power Supply Circuit/Reset Circuit

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.5.6. Power Supply Circuit/Reset Circuit The power supply voltage from AC adaptor is converted to VBAT (3.0V) in IC302. And +3.0V for peripherals and analog part is insulated from VBAT by Doubler of BBIC. Circuit Operation: +5.5V +3.0V...
  • Page 15 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.5.6.1. Charge Circuit The voltage from the AC adaptor is supplied to the charge circuits. +5.5V F301 R373 CHARGE+ C351 CHARGE-...

  • Page 16: Telephone Line Interface

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.5.7. Telephone Line Interface Telephone Line Interface Circuit: Function • Bell signal detection • ON/OFF hook and pulse dial circuit • Side tone circuit Bell (RINGING) signal detection and OFF HOOK circuit: In the idle mode, Q141 is open to cut the DC loop current and decrease the ring load.

  • Page 17: Parallel Connection Detect Circuit/Auto Disconnect Circuit

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.5.8. Parallel Connection Detect Circuit/Auto Disconnect Circuit Function: In order to disable call waiting and stutter tone functions when using telephones connected in parallel, it is necessary to have a circuit that judges whether a telephone connected in parallel is in use or not. This circuit determines whether the telephone connected in parallel is on hook or off hook by detecting changes in the T/R voltage.

  • Page 18: Calling Line Identification (Caller Id)/Call

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.5.9. Calling Line Identification (Caller ID)/Call Waiting Caller ID Function: Caller ID The caller ID is a chargeable ID which the user of a telephone circuit obtains by entering a contract with the telephone company to utilize a caller ID service.
  • Page 19 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Call Waiting Caller ID Calling Identity Delivery on Call Waiting (CIDCW) is a CLASS service that allows a customer, while off-hook on an existing call, to receive information about a calling party on a waited call. The transmission of the calling information takes place almost immediately after the customer is alerted to the new call so he/she can use this information to decide whether to take the new call.

  • Page 20: Block Diagram (Handset)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.6. Block Diagram (Handset) FLASH ANT1 MEMORY EEPROM 10.368 MHz VBAT CHG_DET CHARGE RSTN RF part CONTROL CHARGE CHG_CTL POWER SUPPLY CONTROL BATTERY_ON VBAT BATTERY BBIC MICp MICn Receiver LSRp LSRn (KEY) KEY_LED SP-PHONE SP PAOUTp...

  • Page 21: Block Diagram (Handset_Rf Part)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.7. Block Diagram (Handset_RF Part) KX-PRLA20 BLOCK DIAGRAM (Handset_RF Part)

  • Page 22: Circuit Operation (Handset)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.8. Circuit Operation (Handset) 4.8.1. Outline Handset consists of the following ICs as shown in Block Diagram (Handset) (P.20). • DECT BBIC (Base Band IC): IC1 - All data signals (forming/analyzing ACK or CMD signal) - All interfaces (ex: Key, Detector Circuit, Charge, EEPROM, LCD) •...

  • Page 23: Charge Circuit

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4.8.3. Charge Circuit Circuit Operation: When charging the handset on the Base Unit, the charge current is as follows; DCP(5.5 V)  F301  R371  R372  D362  CHARGE+(Base)  CHARGE+(Handset)  R8  Q3  F1  BATTERY+...

  • Page 24: Location Of Controls And Components

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 5 Location of Controls and Components Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server. 6 Installation Instructions Refer to the Operating Instructions. Note: You can download and refer to the Operating Instructions (Instruction book) on TSN Server.

  • Page 25: Test Mode

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 8 Test Mode 8.1. Engineering Mode 8.1.1. Base Unit Important: Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit. 【OFF】 Dial keypad This pictured model is KX-PRL260 【FLASH】...
  • Page 26 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Set Addr.: 7). Press OK , a long confirmation beep New Data will be heard. CLEAR 8). Press to return to standby mode. Set Addr.: After that, turn the base unit power off and then power on. _ _ _ _ _ _ Note: * To enter "Set dial mode", press   SELECT SELECT    at "...

  • Page 27: Handset

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 8.1.2. Handset Important: Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit. 【OFF】 Dial keypad 【FLASH】 【CALL WAIT】 H/S key operation H/S LCD 1).
  • Page 28 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Frequently Used Items (Handset) ex.) Items Address Default Data New Data Possible Adjusted Possible Adjusted Remarks Value MAX (hex) Value MIN (hex) Frequency 00 07 / 00 08 00 / 01 (*2) 00 02 ~ 00 06 Given value Note:...

  • Page 29: Service Mode

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 9 Service Mode 9.1. How to Clear User Setting (Handset Only) Handset Press simultaneously until a beep sound is heard. Then single handset is initialized. (The contents of user setting are reset to factory default) *Usage time is not cleared.

  • Page 30: Troubleshooting Guide

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10 Troubleshooting Guide 10.1. Troubleshooting Flowchart FLOW CHART Not working Power ON Base Unit Check Power Not recording (*1) Record Check Record No playback Playback Pre-Message Check Playback Link No link Not charged Battery Charge Check Battery Charge Check Link...

  • Page 31: Check Power

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.1. Check Power 10.1.1.1. Base Unit Is the AC Adaptor inserted into AC outlet? (*1) AC Adaptor. Is output voltage of AC adaptor 5.5 V? Check Check Power Supply Circuit. Check VDD1(1.8 V) :Test point (VDD1) RSTN: Reset = "High"? Check Reset Circuit.

  • Page 32: Check Record

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.2. Check Record 10.1.2.1. Base Unit Not record Incoming Message Check Telephone Line Interface Check Bell signal. [Bell]. Check Telephone Line Interface Does the unit catch line? [OFF HOOK]. Check Line In: Pin 25 of BBIC. Check ICM Recording in Signal Route.
  • Page 33 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 <How to change the Auto Disconnect activation time and VOX level> A) Auto Disconnect activation time: Some Telephone Company lines (fiber or cable) ON Hook and OFF Hook voltages are lower than conventional lines, which may cause a malfunction of Auto Disconnect detection.
  • Page 34 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 B) Vox level: It makes easier to detect a small voice (caller) by raising the sensitivity of VOX level. Therefore, the recording of TAM is not turned off during detection. 1) ~ 2) are same as (A). 3) Press "5","1","1".

  • Page 35: Check Playback

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.3. Check Playback 10.1.3.1. Base Unit Check VDD1(1.8 V) :Test point (VDD1) Check Power Supply Circuit. Check output of BBIC (Pin 73,74). Check BBIC and Flash Memory. Check VDD3(5.0 V):Test Point (VDD3). Check IC411 Check Speaker and its surroundings.

  • Page 36: Check Link

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.4.3. Charger Unit Plug in the AC Power source. Charge Handset on Charger Unit. Check Charge Circuit of Charger Unit. Is the voltage of two charge contacts about 5.5 V or more? Check Handset.
  • Page 37 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.5.2. Handset Does Handset link with Base Unit? Handset is OK. Check Base Unit. (Properly working unit) Is the voltage of TP VBAT about 2.2~2.8 V? Check the batteries. Check around Power Supply Circuit/Reset Circuit. Is the voltage of +1.8 V about 1.8 V? Does the RF clock (CLK) oscillate: 10.368 MHz Check around X1 and RF module and adjust...

  • Page 38: Check The Rf Part

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.6. Check the RF part 10.1.6.1. Finding out the Defective part 1. Prepare Regular HS(*1) and Regular BU(*2). 2. a. Re-register regular HS (Normal mode) to base unit (to be checked). If this operation fails in some ways, the base unit is defective. b.
  • Page 39 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.6.2. RF Check Flowchart Each item (1 ~ 5) of RF Check Flowchart corresponds to Check Table for RF part (P.40). Please refer to the each item. Start Link Control Check BBIC interface parts. confirmation signal (RF Block <->BBIC on BU/HS P.C.B)
  • Page 40 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.6.3. Check Table for RF part Item BU (Base Unit) Check HS (Handset) Check Link Confirmation Normal 1. Register Regular HS to BU (to be 1. Register HS (to be checked) to Regular checked).
  • Page 41 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.6.4. TEST RANGE Check Circuit block which range is defective can be found by the following check. Item BU (Base Unit) Check HS (Handset) Check Range Confirmation TX TEST 1. Register Regular HS to BU (to be checked). 1.

  • Page 42: Registering A Handset To The Base Unit

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.7. Registering a Handset to the Base Unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 Handset: {MENU} i # 1 3 0 2 Base unit:...

  • Page 43: Check Handset Transmission

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.9. Check Handset Transmission Check MIC of handset. Check handset Tx in Signal Route. 10.1.10. Check Handset Reception Check speaker of handset. Check handset Rx in Signal Route. Note: When checking the RF part, Refer to Check the RF part (P.38).

  • Page 44: Check Bt Communication

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 10.1.12. Check BT Communication Plug in the AC power source and wait 10 seconds. Use a handset to enter the "Bluetooth" menu: Press [MENU] Bluetooth [SELECT] Is it possible to enter the "Bluetooth" menu? Check the circuit of around RF parts of BT Is it possible to register BT_Headset? Module...
  • Page 45 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Case1: OK AC power on PIO01 0.05s 1.95s 1.5s Case2: NG1(fail to reset BT_IC) AC power on If BT_IC does not work, 1st and 2nd signals does not appear. Check the circuit of around PIO01 POWER and RESET parts of BT Module.

  • Page 46: Disassembly And Assembly Instructions

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 11 Disassembly and Assembly Instructions 11.1. Disassembly Instructions 11.1.1. Base Unit Remove the 2 screws and the stand to remove the cabinet cover. Cabinet cover Stand (*2) 2 screws Note: (*2) (*1) KX-PRL260/262 only (*2) KX-PRD260/262 only...
  • Page 47 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Remove the 1 screw to remove the USB holder. (*2) Remove the Cushion. (*2) Remove the solders. (*2) Remove the 8 screws to remove the Lower Cabinet. Remove the Soundproof Rubber. Solders (*2) Soundproof Rubber Disconnect the connectors CN651，...

  • Page 48: Handset

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 11.1.2. Handset 4 screws Remove the 4 screws. Insert a plastic card. Cabinet body (Ex. Used SIM card etc.) between the cabinet body and the cabinet cover, then pull it along the gap to open the cabinet.

  • Page 49: Charger Unit

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 11.1.3. Charger Unit 2 charge terminals...

  • Page 50: How To Replace The Handset Lcd

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 11.2. How to Replace the Handset LCD Note: The illustrations are simplified in this page. They may differ from the actual product. Peel off DOUBLE SIDE TAPE at the back side LCD 2 points as a figure shown. FRONT SIDE OF LCD BACK SIDE OF LCD DOUBLE SIDE TAPE...

  • Page 51: Measurements And Adjustments

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12 Measurements and Adjustments This chapter explains the measuring equipment, the JIG connection, and the PC setting method necessary for the measurement in Troubleshooting Guide (P.30) 12.1. Equipment Required • Digital multi-meter (DMM): it must be able to measure voltage and current. •...

  • Page 52: Connections (Handset)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.2.2. Connections (Handset) Connect the DC Power or Battery to BATT+ and BATT-. Connect the JIG cable GND (black) to GND. Connect the JIG cable UTX (yellow) to UTX and URX (red) to URX. URX (red) To Serial Port UTX (yellow)

  • Page 53: How To Install Batch File Into P.c

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.2.3. How to install Batch file into P.C. Insert the Batch file CD-ROM into CD-ROM drive and copy PNZZTG**** folder to your PC (example: D drive). <Example for Windows> On your computer, click [Start], select Programs Open an MS-DOS mode window.

  • Page 54: Commands

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.2.4. Commands See the table below for frequently used commands. Command name Function Example rdeeprom Read the data of EEPROM Type “rdeeprom 00 00 FF”, and the data from address “00 00” to “FF” is read out. readid Read ID (RFPI) Type “readid”, and the registered ID is read out.

  • Page 55: Adjustment Standard (Base Unit)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.3. Adjustment Standard (Base Unit) When connecting the simulator equipment for checking, please refer to below. 12.3.1. Bottom View ANT_BT Spectrum Analyzer Frequency Counter (*1) Send command "SFR", then the frequency output on this TP. Oscilloscope (*2) C403 URX1...

  • Page 56: Adjustment Standard (Handset)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.4. Adjustment Standard (Handset) When connecting the simulator equipment for checking, please refer to below. 12.4.1. Component View ANT1_TP C860 A B C D E F G H I MIC+ PRLA TGHA 20 21 MIC- RU FX TW...

  • Page 57: Things To Do After Replacing Ic Or X'tal

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.5. Things to Do after Replacing IC or X'tal If repairing or replacing EEPROM and X'tal, it is necessary to download the required data such as Programming data or adjustment data, etc. in memory. The set doesn't operate if it is not executed.
  • Page 58 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.5.1.1.1. How to update the BBIC. • Execute COM communicator.exe 1. Initialize COM port.(Only once at first.) Select “Setting”  “Serial Port”  “Initial Setting  “OK”. Setting Serial Port Initial Setting Cancel 2.Select serial port COM number.
  • Page 59 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 • Execute COM communicator.exe again <<Write program>> 1. Select “ProgramLoader”. 2. Select "Setting"/"Config". Fill up the “Config Settings”. Note: (2) Select Baud Rate as 57600. If write error happens, select slower Baud Rate (example: 19200). 3.
  • Page 60 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 4. Start download. (1). Connect Unit and 3wire jig. (2). Confirm "Turn on power to target and press download." display. (3). Power off the unit, then power on. (4). Press "Download" button again. 5.
  • Page 61 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.5.1.2. Handset First, operate the PC setting according to The Setting Method of JIG (P.51). Then download the appropriate data according to the following procedures. Items How to download/Required adjustment EEPROM (IC3) Adjusted parameter data is stored in memory.

  • Page 62: Frequency Table

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.6. Frequency Table Ch. (hex) TX/RX Frequency (MHz) Channel 0 1928.448 Channel 1 1926.720 Channel 2 1924.992 Channel 3 1923.264 Channel 4 1921.536...

  • Page 63: Bluetooth Frequency Table

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 12.7. Bluetooth Frequency Table Frequency (MHz) Frequency (MHz) Frequency (MHz) 2402 2435 2468 2403 2436 2469 2404 2437 2470 2405 2438 2471 2406 2439 2472 2407 2440 2473 2408 2441 2474 2409 2442 2475 2410...

  • Page 64: Miscellaneous

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 13 Miscellaneous 13.1. How to Replace the LLP (Leadless Leadframe Package) IC Note: This description only applies to the model with Shield case. 13.1.1. Preparation • PbF (: Pb free) Solder • Soldering Iron Tip Temperature of 700 F ±...

  • Page 65: How To Install The Ic

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 13.1.4. How to Install the IC 1. Place the solder a little on the land where the radiation GND pad on IC bottom is to be attached. Soldering Iron Land Solder P.C.Board 2.

  • Page 66: How To Replace The Flat Package Ic

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 13.2. How to Replace the Flat Package IC Even if you do not have the special tools (for example, a spot heater) to remove the Flat IC, with some solder (large amount), a soldering iron and a cutter knife, you can easily remove the ICs that have more than 100 pins.

  • Page 67: How To Install The Ic

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 13.2.3. How to Install the IC 1. Temporarily fix the FLAT PACKAGE IC, soldering the two marked pins. *Check the accuracy of the IC setting with the corresponding soldering foil. 2. Apply flux to all pins of the FLAT PACKAGE IC. 3.

  • Page 68: Terminal Guide Of The Ics, Transistors And Diodes

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 13.3. Terminal Guide of the ICs, Transistors and Diodes 13.3.1. Base Unit C0DBEYY00102 C1AB00004194 C0DBGYY00915 B1ACGP000008 DSC7003S0L Cathode Anode Cathode Anode B1ABDM000001,B1ADGE000012,2SC6054JSL, DY2J25000L, B1GBCFYY0020,2SA1576S,B1GBCFYY0020, DZ2J068M0L UNR9216J0L,2SC6054JSL,2SC6054JSL B0EDER000009 B0ECKM000008 Cathode Cathode Anode C0JBAZ001466, Anode PNWI1PR***, B3AAB0000347,...

  • Page 69: Schematic Diagram

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 14 Schematic Diagram 14.1. For Schematic Diagram 14.1.1. Base Unit (Schematic Diagram (Base Unit_Main)) Notes: 1. DC voltage measurements are taken with voltmeter from the negative voltage line. Important Safety Notice: Components identified by mark have special characteristics important for safety.

  • Page 70: Schematic Diagram (Base Unit_Main)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 14.2. Schematic Diagram (Base Unit_Main) 14.2.1. KX-PRL260/PRD260 W 0.15mm L 22+/-4mm 1st or 4th layer RXON ANT2_TP ANT1_TP RX-balun SLx2 W1=0.2mm W=0.175mm L1=3.3mm DL801 L=3.6mm W2=0.7mm C851 C853 ANT1-Short C861 S=0.125mm L2=5.0mm RF_RXn W=0.25mm ANT1-S-GND...
  • Page 71 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 USB CHARGE KX-PRL26x only *CN1101 USB_GND 2.68V 2.00V VBUS USB_GND VBUS IC1001 VBUS F1001 5.0V VBUS 3.0A 4 VDD VBUS VOUT 3 CE GND_USB REFERENCE USB_GND USB_GND USB_GND USB_GND USB_GND 1XX : TEL LINE VBUS_USB 3XX : POWER, CHARGE 4XX : MIC, SP...

  • Page 72: Schematic Diagram (Handset_Main)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 14.3. Schematic Diagram (Handset_Main) Charge Current VBAT To Battery BATT+ P1 1.1A K0.1u 6.3V SOCp 220u SHORT J56p BATT- SOCn GND GND *R10 DdEE2sO) *Q10 When on Charge *Q11 *R13 *Q12 *R12 *R11 +1.8V K1000p...
  • Page 73 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 RF BLOCK RX-balun W=0.170mm 50 ohm line W=0.25mm L=3.6mm L=2mm L=2mm S=0.125mm RF_RXn open-stub ANT1_TP W1=0.2mm C862 RX̲RF C801 L1=3.0mm B1.5p D10p W2=0.7mm W=0.25mm L2=4.3mm L=2mm 50 ohm line SHORT RF_RXp Total L=4mm W=0.25mm W=0.3mm W=0.3mm...

  • Page 74: Printed Circuit Board

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 15 Printed Circuit Board 15.1. Circuit Board (Base Unit_Main) 15.1.1. Component View D I P KX-PRL260/262, PRD260/262 CIRCUIT BOARD (Base Unit_Main (Component View))

  • Page 75: Bottom View

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 15.1.2. Bottom View ANT_BT STM/CKM/P15 (CLK:10.368MHz) RA611 UTX1 URX1 GND1 For JIG KX-PRL260/262, PRD260/262 CIRCUIT BOARD (Base Unit_Main (Bottom View))

  • Page 76: Circuit Board (Key)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 15.2. Circuit Board (KEY) 15.2.1. Component View / Bottom View KX-PRL260/262, PRD260/262 CIRCUIT BOARD (KEY (Component View / Bottom View))

  • Page 77: Circuit Board (Mic)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 15.3. Circuit Board (MIC) 15.3.1. Component View / Bottom View (Component View) (Bottom View) KX-PRL26x/PRD26x    -GW-C PNLB2284Z C 9 0 1 KX-PRL260/262, PRD260/262 CIRCUIT BOARD (MIC (Component View / Bottom View)) 15.4.

  • Page 78: Circuit Board (Handset_Main)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 15.5. Circuit Board (Handset_Main) 15.5.1. Component View C860 CHG (+) A B C D E F G H I MIC+ RCV- PRLA TGHA RCV+ 20 21 MIC- RU FX TW COUNTRY for signal communication jig VBAT CHG (-) KX-PRLA20 CIRCUIT BOARD (Handset_Main (Component View))

  • Page 79: Bottom View

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 15.5.2. Bottom View KX-PRLA20 CIRCUIT BOARD (Handset_Main (Bottom View))

  • Page 80: Exploded View And Replacement Parts List

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 16 Exploded View and Replacement Parts List 16.1. Cabinet and Electrical Parts (Base Unit) 2(*2) 1(*1) (*2) PCB5 (*2) 9(*1) PCB4 (*1) PCB1 6(*1) 6(*1) PCB2 27(*1) MIC1 (*2) PCB3 6 x 40 mm 6 x 100 mm (*1) 6 x 100 mm...

  • Page 81: Cabinet And Electrical Parts (Handset)

    (*1) This cable is fixed by heat-sealing. Refer to How to Replace the Handset LCD (P.50). (*2) The rechargeable Ni-MH battery HHR-4DPA is available through sales route of Panasonic. (*3) Attach the SPACER (No. 122) to the exact location described above.

  • Page 82: Cabinet And Electrical Parts (Charger Unit)

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 16.3. Cabinet and Electrical Parts (Charger Unit) 200-1 200-5 200-2 200-3 200-4...

  • Page 83: Accessories And Packing Materials

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 16.4. Accessories and Packing Materials 16.4.1. Tools KX-PRL260/262, KX-PRD260/262 A3,A4 (For Base unit) (For Charger) (For KX-PRL262/ KX-PRD262) PAD 5(*1) PAD 6(*1) PAD 4(*1) PAD 1(*1) PAD 2(*1) PAD 3(*1) Note: (*1)PAD1,PAD2,PAD3,PAD4,PAD5 and PAD6 are a piece of P2. (For KX-PRL260/ KX-PRD260) PAD 4(*2) PAD 3(*2)

  • Page 84: Tools Kx-Prla20

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 16.4.2. Tools KX-PRLA20 (For Charger) PAD 1(*1) PAD 2(*1) Note: (*1)PAD1,PAD2 are a piece of P2.

  • Page 85: Replacement Parts List

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 16.5. Replacement Parts List Safety Ref. Part No. Part Name & Description Remarks 1. RTL (Retention Time Limited) PQHA10023Z RUBBER PARTS, FOOT Note: PNKE1325Z1 USB JACK COVER (for KX-PRD260) The “RTL” marking indicates that its Retention Time is (for KX-PRD262) (BLACK) Limited.
  • Page 86 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks PNKE1323Z1 RUBBER, BOTTOM Q710 2SC6054JSL TRANSISTOR(SI) (for KX-PRL260) Q711 UNR9216J0L TRANSISTOR(SI) (for KX-PRL262) (BLACK) Q141 2SA1776P TRANSISTOR(SI)
  • Page 87 All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks C518 ECUE1A104KBQ 0.1 R701 ERJ2GEJ332 3.3k C519 ECUE1A104KBQ 0.1 R702 ERJ2GEJ103 C601 ECUE1A104KBQ 0.1 R710 ERJ2GEJ103 C611...

  • Page 88: Handset

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 16.5.1.5. USB Board Parts Safety Ref. Part No. Part Name & Description Remarks DSA900100L TRANSISTOR(SI) 2SC6054JSL TRANSISTOR(SI) Safety Ref. Part No. Part Name & Description Remarks DRC9143T0L TRANSISTOR(SI) PCB5 PNWP5PRD260H USB P.C.BOARD ASS'Y (LEDS) (RTL) LED1...

  • Page 89: Charger Unit

    All manuals and user guides at all-guides.com KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20 Safety Ref. Part No. Part Name & Description Remarks Safety Ref. Part No. Part Name & Description Remarks C191 ECUE0J105KBQ 1 PNPK3781005Z GIFT BOX (for KX-PRL262W) (WHITE) C801 ECUV1H100DCV 10p PNPK3781002Z GIFT BOX C859 ECUE1H100DCQ 10p (for KX-PRD262B) (BLACK)

This manual is also suitable for:

Prd seriesKx-prl260bKx-prl260wKx-prl262bKx-prl262wKx-prd260b ... Show all

Table of Contents