Table of Contents
Advertisement
10.1.9. Check Handset Transmission
Check MIC of handset.
Check handset Tx in Signal Route.
10.1.10. Check Handset Reception
Check speaker of handset.
Check handset Rx in Signal Route.
Note:
When checking the RF part, Refer to Check the RF part
(P.38).
10.1.11. Check Caller ID
BASE UNIT
NO
Did bell ring?
(Message indicator
blinks)
YES
Check Calling Line Identification (Caller ID)/
Call Waiting Caller ID.
Cross Reference:
Telephone Line Interface (P.16)
Calling Line Identification (Caller ID)/Call Waiting Caller
ID (P.18)
Note:
• Make sure the format of the Caller ID service of the
Telephone company that the customer subscribes to.
• It is also recommended to confirm that the customer is really
a subscriber of the service.
All manuals and user guides at all-guides.com
Check bell signal detection in
Telephone Line Interface.
KX-PRL260/KX-PRL262/KX-PRD260/KX-PRD262/KX-PRLA20
43
Advertisement
Table of Contents
