Deleting All Waypoints; Navigating To A Waypoint - Garmin striker 4 Owner's Manual

Creating a Waypoint at a Different Location
1
Select User Data > Waypoints > New Waypoint.
2
Select an option:
• To create the waypoint by entering position coordinates,
select Enter Coordinates, and enter the coordinates.
• To create the waypoint using the waypoint map, select
Use Waypoint Map, select the location, and select
• To create the waypoint using your present location, select
Use Current Position, and enter the data.
The waypoint is saved automatically.
Editing a Saved Waypoint
1
Select User Data > Waypoints.
2
Select a waypoint.
3
Select Edit Waypoint.
4
Select an option:
• To add a name, select Name, and enter a name.
• To change the symbol, select Symbol.
• To change the depth, select Depth.
• To change the water temperature, select Water Temp..
• To change the comment, select Comment.
• To move the position of the waypoint, select Position.
Marking and Navigating to a Man Overboard
Location
From any screen, select
The fishfinder sets a direct course back to the location.

Navigating to a Waypoint

1 Pan the waypoint map to find the waypoint.
2
Place the center of the cursor on the center of the waypoint
symbol.
The waypoint name appears on the screen.
3
Select the waypoint.
4
Select Navigate Route > Go To.
Measuring Distance on the Waypoint Map
You can measure the distance between two locations.
1
From the waypoint map, begin panning
STRIKER 4, page 1).
2
Select > Measure Distance.
The distance and other data appear on the screen.
Deleting a Waypoint or an MOB
1
Select User Data > Waypoints.
2
Select a waypoint or an MOB.
3
Select Delete > OK.

Deleting All Waypoints

Select User Data > Manage Data > Clear User Data >
Waypoints > All.
Sharing Waypoints and Routes Across
Devices
Before you can share waypoints and routes, you must connect
the blue and brown wires on the power cable.
The blue wire is for Tx (Transmit) and brown is for Rx (Receive).
These wires are used only for sharing data between compatible
STRIKER and echoMAP
™
6
> Man Overboard > Yes.
(Panning on the
series devices.
You must turn on user data sharing for both devices to share
data.
Select User Data > Manage Data > User Data Sharing >
On on both devices.
Waypoint Map Settings
Select Waypoint Map >
.
Waypoints: Shows the list of waypoints.
Waypoint Display: Sets how to display waypoints on the chart.
Routes: Shows the list of routes.
Track: Shows the track option menu.
Search: Allows you to search for saved routes and waypoints.
Map Setup: Sets the perspective of the waypoint map and
shows the heading line, which is a line drawn on the waypoint
map from the bow of the boat in the direction of travel.
Overlay Numbers: Allows you to customize the data shown on
the waypoint map.
A route is a sequence of waypoints or locations that leads you to
your final destination.
Creating and Navigating a Route Using the
Waypoint Map
The starting point can be your present location or another
location.
1
Select User Data > Routes > New > Use Waypoint Map.
2
Pan the waypoint map to select the starting location of the
route.
3
Follow the onscreen instructions to add a turns.
4
Select > Navigate To.
5
Select an option.
Editing a Saved Route
You can change the name of a route or change the turns the
route contains.
1
Select User Data > Routes.
2
Select a route.
3
Select Edit Route.
4
Select an option:
• To change the name, select Name, and enter the name.
• To select a waypoint from the turn list, select Edit Turns >
Use Turn List, and select a waypoint from the list.
• To select a turn using the chart, select Edit Turns > Use
Waypoint Map, and select a location on the chart.
Viewing a List of Routes
Select User Data > Routes.
Browsing for and Navigating a Saved Route
Before you can browse a list of routes and navigate to one of
them, you must create and save at least one route.
1
Select User Data > Routes.
2
Select a route.
3
Select Navigate To.
4
Select an option:
• To navigate the route from the starting point used when
the route was created, select Forward.
• To navigate the route from the destination point used
when the route was created, select Backward.
.
Routes
Routes