BOX CONTENTS WHAT’S IN THE BOX Majority D40 Bookshelf Speakers Instructions Guide 3.5mm to 3.5mm AUX Cable Remote Control 3.5mm to RCA Cable Power Adapter...
CONTROLS & FUNCTIONS FRONT VIEW Remote Sensor Speakers SIDE VIEW Mode Headphone Jack Vol + / Next Mode indicator lights Vol - / Previous...
Page 5
CONTROLS & FUNCTIONS BACK VIEW Speaker connector cable 100--240V/50-60HZ Power Speaker input USB slot OPTICAL input SD Card slot Power On/Off AUX input...
Page 6
CONTROLS & FUNCTIONS REMOTE CONTROL Power Reset Vol + Play/Pause Previous/Back Vol - Treble - Bass - Mode Bass + Treble + Next Mute...
SETTING UP YOUR MAJORITY D40 SPEAKERS Please note that the instructions in this manual will refer to the speaker or remote control button number e.g (Ref.*number*) in accordance with the diagrams on pages 2-4. Connecting and powering the unit Using the power cord provided, plug one end into the back of the primary speaker (Ref.12) and plug the other end into a mains socket.
BASIC OPERATION Basic controls Volume, treble and bass can be changed on all speaker modes. Use the + (Ref.18)/(Ref.4) and - (Ref.21)/(Ref.5) buttons to control the volume. Press X (Ref.28) to mute the audio. Use the Treble- (Ref.22), Treble+ (Ref.26), Bass- (Ref.23) and Bass+ (Ref.25) to control the bass and treble settings of the sound.
BLUETOOTH, SD & USB CONTROLS Please note that the following controls and functions relate to Bluetooth, SD card and USB mode only. For AUX and Optical controls and functions, please see the section ‘AUX and Optical Modes’ (page 8). Note: in the table below, (H) = ‘Press and hold’. Remote Speaker Function...
3 short ascending beeps. If necessary, select ‘AUX’ mode using the ‘Mode’ button (Ref.24)/(Ref.3). Optical mode To connect the D40 speakers to an external device, use an optical cable to connect via the OPTICAL input (Ref.10). Press the ‘Mode’ button (Ref.24)/(Ref.3) to switch the Mode to Optical. The corresponding mode indicator light (Ref.7) will light up red and make a short sound...
BLUETOOTH MODE To connect an external device to the D40 speakers, ensure that the speakers are in ‘Bluetooth’ mode. Select ‘Bluetooth’ mode manually by using the ‘Mode’ button (Ref.24)/(Ref.3) until the corresponding mode indicator light, labelled ‘AUX/BT’, (Ref.7) lights up blue. The speakers will make a series of short ascending beeps to indicate that Bluetooth mode is now active.
USB & SD CARD MODE To use USB mode, insert a USB drive into the USB port at the back of the speaker (Ref.13). The speakers will sound with 2 short beeps to indicate that USB mode is active, and the ‘USB/OPT’ mode indicator light (Ref.7) will light up blue. If necessary, select ‘USB’...
CONNECTING HEADPHONES Connect wired headphones (not included) to the headphone port of the Majority D40 speakers (Ref.6) to listen to audio through headphones. Ensure the volume is turned down before you use the headphones. You will now hear audio output through the headphones.
Ensure that you are on Bluetooth mode on the speaker and the Bluetooth on your device is Bluetooth not connecting switched on. Select the Bluetooth device ‘D40’ and you should now be able to play audio. SUPPORT If you require further assistance with your new soundbar, please contact our support team on the Majority website: www�majority�co�uk/support...
WARRANTY All products come with a standard 12 month warranty. All items must be registered www�majority�co�uk for the warranty to be valid. Once on the web page, use the menu to find “Register Your Product”. You will also be given the chance to extend your...
ADDITIONAL WARNINGS 2. Keep these instructions. Instructions are also availa- The apparatus shall not be exposed to dripping or splash- ble for download at www.majority.co.uk ing and no objects filled with liquid, such as vases, shall 3. Heed all Warnings be places on the apparatus.
Page 20
H O M E A U D I O • C A M B R I D G E WWW.MAJORITY.CO.UK...
Need help?
Do you have a question about the D40 and is the answer not in the manual?
Questions and answers