Page 1
Box Contents A. Majority D40 Speakers B. 3.5mm to 3.5mm Audio Cable C. 3.5mm to RCA Audio Cable D. Remote Control E. Power Adapter (UK, EU or US Plug) Controls and Functions Front View...
. Speaker Connector Cable 9. Output to Left Speaker 10. Optical Port 11. Power On/Off 12. Power Port 13. USB Port 14. SD Card Port 15. 3.5mm AUX Port Remote Control...
Instructions Guide Please note all (Ref.) refer to the Controls and Functions in the above diagrams. Setting up your Majority D40 Speakers Connecting and Powering the Unit Using the power cord provided, plug one end into the back of the primary speaker (Ref.12) and plug the other end into a mains socket.
Page 5
If necessary, select ‘AUX’ mode using the ‘Mode’ button (Ref.24)/(Ref.3). Optical Mode To connect the D40 speakers to an external device, use an optical cable to connect via the OPTICAL input (Ref.10). Press the ‘Mode’ button (Ref.24)/(Ref.3) to switch the Mode to Optical. The corresponding mode indicator light (Ref.7) will light up red and you will hear the word ‘Optical’...
Maximum storage compatibility for USB and SD/TF cards: 64GB. Connecting Headphones Connect wired headphones (not included) to the headphone port of the Majority D40 speakers (Ref.6) to listen to audio through headphones. Ensure the volume is turned down before you use the headphones.
IMPORTANT Please read all instructions carefully before use. WARNING Risk of electric shock. Do not open. 1. Read these instructions: 2. Heed all warnings. 3. Follow all instructions in the user manual. 4. Do no clean the apparatus near or with water. 5.