Display Setting - MPP Solar 3KVA User Manual

35
Equalization interval
Equalization activated
36
immediately

Display Setting

The LCD display information will be switched in turns by pressing "SELECT" key. The selectable information is
switched to display in order as below:
charging power, solar charging power, battery voltage/output frequency, main CPU Version and second
CPU Version.
Selectable information
Input voltage/Output voltage
(Default Display Screen)
Input frequency/Output frequency
PV voltage/Output voltage
Solar charging power/Output voltage
30days (default)
Enable
If equalization function is enabled in program 30, this program
can be set up. If "Enable" is selected in this program, it's to
activate battery equalization immediately and LCD main page
will shows " ". If "Disable" is selected, it will cancel
equalization function until next activated equalization time
arrives based on program 35 setting. At this time, "
not be shown in LCD main page.
input voltage/output voltage, input frequency, PV voltage, total
LCD display
Input Voltage=120V, output voltage=120V
Input frequency=50Hz, output frequency =50Hz
PV voltage=40V, output voltage=120V
Solar charging power=500W, output voltage=120V
16
Setting range is from 0 to 90 days.
Increment of each click is 1 day
Disable (default)
" will