Setting the vacuum fan
When printing on thin media or media without stiffness, it can prevent wrinkles or media jamming, if the vacuum fan is set to
Low.
Procedure
[1]
Display the Printing Preferences screen of printer driver.
"Displaying the Printing Preferences screen of printer driver" on page 12
[2]
[3]
[4]
Click [Advanced...] in the [Basic] tab.
From the [Vacuum Fan] menu, select [Middle] or [Low].
Note
• If the checkmark is removed from the checkbox, the setting already
registered in the printer's main body has priority.
• The same can be also done with the remote panel of VSM.
Set in the [Vacuum Fan] menu of the [Advanced] tab.
Click [OK].
• The setting is reflected in this product.
Setting the vacuum fan
49