Using Udirect 3 As A Remote Control For Your Hearing Aid - Unitron uDirect 3 Manual

Using uDirect 3 as a remote control
for your hearing aid
Before the remote control functionality can be
used, your hearing healthcare professional must
enable the remote control.
There are two ways to use the uDirect 3
as a remote control:
The neckloop is plugged in with
•
both ends, and the uDirect 3
must be worn around your neck.
The remote control function is
available as long as you are not
streaming audio.
The neckloop is completely
•
un-plugged and uDirect 3 is
operated at arm's length. No
streaming is possible in this
configuration.
Make sure the uDirect 3 is switched on.
20
Volume change
Press the ( ) volume button on the
uDirect 3 to adjust the volume of your hearing
aids:
Press ( ) to increase loudness
•
Press ( ) to decrease loudness
•
Program change
Use the access ( ) button to change hearing
aid listening programs.
Changing hearing aid programs is only possible
if no streaming is in progress.
Press and hold the home (
seconds) to select your favorite hearing
program configured by your hearing healthcare
professional.
Push the home ( ) button to return to the
startup hearing aid program and volume levels
of your hearing aids.
) button (> two
21