Kobalt SGY-AIR160NB Manual page 22

CARE AND MAINTENANCE
2. Screw the Air Cap Ring (E1, E2) onto the face
of the spray gun by turning it clockwise and
hand tighten (See Figure 2a,2b).
3. Slide the Paint Needle through the back of the
Spray Gun (See Figure 3a,3b).
NOTE :
Make sure the hole in the trigger is
properly aligned or the paint needle cannot be
inserted.
. 4 S d i l e N e e d e l
(See Figure 4a,4b).
S r p n i g o v r e h t e P i a t n N e e d e l
22
2a
E1
Clockwise
2b
E2
Clockwise
3a
3b
4a