Care And Maintenance - Kobalt SGY-AIR160NB Manual

CARE AND MAINTENANCE

To properly maintain and keep your sprayer working at its optimal
performance, it is strongly recommended that the spray gun nozzle be
cleaned and cleared of any clogs or debris using recommended cleaning
solutions such as Mineral Spirits, Paint Thinner or Lacquer Thinner. Consult
with your local retailer in choosing the right clean solution for the material you
are using.
DO NOT USE ACID BASED SOLVENTS, AS ACID BASED SOLVENTS
CAN DAMAGE THE SPRAYER.
ALWAYS REMOVE THE AIR SUPPY FROM THE SPRAY GUN PRIOR TO
PERFORMING ANY CLEANING OR MAINTAINENACE.
KEEP AWAY FROM ANY IGNITION SOURCES.
ALWAYS WEAR PROPER LE CLEANING OR PERFORMING WHILE
CLEANING OR PERFORMING MAINTENACE ON THE SPRAY GUN.
WARNING
NEVER SUBMERGE THE SPRAY GUN HOUSING INTO SOLVENT
MATERIAL.
Cleaning Instructions
1. Remove the air supply from the spray gun.
2. Remove the Cup Lid (C1) from the Paint
Cup (B1) and empty any remaining paint back
into the original container.
1
2
18
C1
Counterclockwise
B1