Kobalt SGY-AIR160NB Manual page 20

CARE AND MAINTENANCE
6. Unscrew the Fluid Adjustment Knob (G1,G2)
by turning counterclockwise, using a damp
c o l h t i w h t c e l a
fluid adjustment knob and set it aside
(See Figure 6a,6b).
7. Pull out needle spring and the paint needle.
Place it in the secondary container to soak
(See Figure 7a,7b).
8. Using provided wrench (8 mm), unscrew
the Fluid Nozzle by turning counterclockwise
and place it in the secondary container to
soak (See Figure 8a,8b).
n n i g s l o t u o i n o n t i w p i e o f f h t e
20
6a
Counterclockwise
6b
Counterclockwise
7a
7b
8a
G1
G2