Spray Gun Set-Up - Kobalt SGY-AIR160NB Manual

SPRAY GUN SET-UP

WARNING: TO PREVENT SERIOUS INJURY FROM EXPLOSION:
Use only clean, dry, regulated, compressed air to power this tool. Do not use
oxygen, carbon dioxide, combustible gases, or any other bottled gas as a
power source for this tool.
Lubricators should not be used with spray guns. The use of inline
lubricators will contaminate the material and will ruin the paint finish.
Air Supply Set-up
1. Not all accessories shown are included, but are recommended for best
performance (See Figure 1).
2. It is recommended that an in-line air filter be incorporated into the air supply.
1
1a
7a
2
1b
7b
Recommended Air Line Set-Up
PART NO.
1a/1b
Small Gravity/Siphon Feed Spray Gun
2a/2b Female Plug (not included)
3a/3b Female Coupler (not included)
4a/4b Air Hose (not included)
5a/5b In-Line Filter (not included)
6a/6b Air Compressor (not included)
7a/7b Air Pressure Regulator (not included)
2a 3a
2b
3b
Description
4a 2a
4b 2b
12
3a
5a
5a
3b
5b
5b
6a
6b