Inserting/Replacing Batteries; First Use; Switching The Product On/Off - Silvercrest SDABC 1 A2 Operation And Safety Notes

˜ Inserting/replacing batteries
Remove the battery compartment lid to open the battery
compartment
Insert 4 batteries (type 1 .5 V, LR6, AA) . Ensure correct polarity .
Note the markings inside the battery compartment
Reattach the battery compartment lid until it locks into place .
NOTE: To see the battery status, press Menu/Info
LCD display
LCD display") . The battery level is shown in percent .
˜ First use
˜ Switching the product on/off
Operation
Operation with power
adaptor
15 ] [
Battery‑powered operation Standby mode:
22 GB/IE/NI
. If applicable, remove the used batteries .
6 ] [
several times (see "Displaying information in the
1 ] [
LCD display
Standby mode:
1 ] [
Clock
Alarm times
No display until the product is
switched on with
.
6 ] [
on the
9 ] [
/Mode
.
8 ] [