TP-Link TL-POE150S Installation Manual

Installation Guide
PoE Injector and PoE Splitter
Some models featured in this guide may be unavailable in your country or region. For local sales information, visit https://www.tp-link.com.
For simplicity, we will take TL-POE150S and TL-POE10R for example throughout the Guide, other models may differ in appearance.
PoE Injector Only
Power Socket Ethernet Device
(switch, router, etc.)
PoE Splitter Only
PoE/PoE+ Switch
PoE Injector & Splitter
Ethernet Device
(switch, router, etc.)
Power Socket
The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE
AP and PoE IP Phone through an Ethernet cable.
PoE Injector
The PoE Splitter can be used with a PoE/PoE+ switch to deliver direct current (DC) power and data to a Non-PoE
device.
PoE Splitter
LAN OUT
The PoE injector and PoE splitter can be used as a kit to supply power and transmit data to a Non-PoE
device.
PoE Injector
LAN IN PWR DC 48V
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs on the product guides, welcome
to email techwriter@tp-link.com.cn.
© 2020 TP-Link 7106508857 REV5.1.0
LAN IN PWR DC 48V
12V 9V 5V
Note:
Set the required voltage
of the non-PoE device
before cable connection.
PWR DC OUT
PoE Splitter
Note:
Set the required voltage
of the non-PoE device
before cable connection.
LAN OUT PWR DC OUT
Powered Device (PD)
IP Camera AP
Non-PoE Device
(suggested power:<12 W)
Non-PoE Device
(suggested power:<12 W)
12V 9V 5V
IP Phone