Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for TP-Link TL-POE150S
Summary of Contents for TP-Link TL-POE150S
-
Page 1: User Guide
User Guide TL-POE150S PoE Injector Rev:3.0.0 7106503937... - Page 2 COPYRIGHT & TRADEMARKS Specifications subject change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
-
Page 3: Fcc Statement
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 4: Ce Mark Warning
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. -
Page 5: Table Of Contents
CONTENTS Package Contents..............1 Chapter 1 Introduction ............1 Overview of the Product ..........1 Features ..............2 Chapter 2 Identifying External Components....... 2 Chapter 3 Connecting the PoE Injector....... 3 Appendix: Specifications............5... -
Page 6: Package Contents
Chapter 1 Introduction 1.1 Overview of the Product Thank you for choosing the TL-POE150S PoE Injector. The Power over Ethernet (PoE*) Injector is able to supply steady power to Powered Device (PD*) or PoE Splitter over the Ethernet cable. The Ethernet equipment can work as a Power Sourcing Equipment (PSE*) with the help of the TL-POE150S connection. -
Page 7: Features
*PoE: This technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. *PD: A device powered by a PSE and thus consumes energy. Examples include powering IP telephones, wireless LAN access points, network cameras, network hubs, embedded computers etc. -
Page 8: Chapter 3 Connecting The Poe Injector
Chapter 3 Connecting the PoE Injector You can use TL-POE150S PoE Injector with PD or PoE Splitter to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. - Page 9 There are two schemes to realize the PoE. 1. If the device supports PoE (take an IP camera with PoE for example), following topology will work: Scheme 1 2. If the device does not support PoE, it is necessary to have a PoE Splitter to separate the power and data, transmitting them detached in one UTP cable and one power cable.
-
Page 10: Appendix: Specifications
Note: Do not mistake the power port of the TL-POE150S and TL-POE10R when choosing the Scheme 2, or else it will cause serious damage to your network device. If you want to know more details about TL-POE10R Splitter, please refer to “TL-POE10R User Guide” on our website http://www.tp-link.com.