Preparing For Installation - GE PVB94 Installation Instructions Manual

PREPARING FOR INSTALLATION

• Unpack the cooktop and read the Installation
Instructions to understand the required countertop
cutout dimensions and location in the countertop,
the cooktop spacing to the front edge of the
countertop, and the required clearances to the
cabinets and walls. The vent system required cutout
side to side counter space to meet the required
spacing and clearances for the cooktop.
• Using the illustrations below and taking
measurements of the cooktop to establish
and the vent system. Note the cooktop rear edge
Screw head
Front of cutout
in countertop
Front edge
of countertop
Installation Preparation
Front
edge
of
cooktop
C
Dimension C is defined in cooktop Installation Instruction
Front of cutout
in countertop
A is the dimension from the screw head on the front surface of
the cooktop base to the rear edge of the cooktop, dimension A can also be
Cooktop
4-1/2" Max
Side View: Installed Vent
• Refer to the Creative Solutions section on page 8 if
more counter space is needed.
• Using the illustrations on pages 5 through 7 and
taking measurements of the vent system and its
needed within the cabinet, the exhaust vent
direction, and the alignment of the exhaust vent with
the ducting. If needed for clearance or duct hookup
alignment, reposition the location of the cooktop,
or modify the cabinetry, or modify the ducting. A
remote blower kit JXR867 is available to move the
blower assembly out of the cabinet area.
correctly located, and relocate if needed.
B
B is the minimum dimension of the
flat portion of countertop that is needed
COOKTOP
A
located in cooktop Installation Instructions.
Depth of cutout is A + 2 1/8"
Minimum counter depth B = A + C + 2.5"
Cooktop
5-1/2"
5-1/2"
Max
Max
Front View: Installed Vent
6
Back edge
of cooktop
1/8" minimum
D
o
w
n
d
3/8"
r
minimum
a
f
t
V
e
n
t
2 1/8"
Back of cut
in countertopout