Cleaning Programs - Panasonic NN-CS88LB Operating Instructions Manual

Cleaning Programs

F1. Drain Water
Water is pumped through the system to clean the pipes. The water is drained
into the drip tray.
Add 100 ml of
water to the water
tank. Ensure drip
tray is empty.
Note
1. Only run this program with 100 g of water in the tank.
2. Do not remove the drip tray during the drain water program.
3. Empty the drip tray and rinse with running water after the program has
finished.
Caution
If the Drain Water program is used directly after a steam cooking program,
hot water may be drained into the drip tray.
F2. System Cleaning
The first stage of this program cleans the system with a citric acid solution.
The second stage runs water through the system to rinse the pipes.
Make a solution of
20 g citric acid and
250 ml of water, add
the solution to the
water tank. Ensure
drip tray is empty.
After the program has
paused, fill the water tank
54
EN
with water (to max level).
Tap Auto Select F1 (Drain
Cook pad Water) by tapping
once.
Tap Auto Select F2 (System
Cook pad Cleaning) by tapping
once.
.
.
Touch Start/Confirmation.
The program will run for approx.
1 minute. Empty the drip tray after the
program has finished.
Touch Start/
Confirmation.
Empty the drip
tray after the
program has
finished.
Touch Start/
Confirmation.
The program
will run for
29 minutes.