Select Repeater; Adjacent Locality Data; Adjacent Locality Parameters - Viking 242-2009-632 Service Manual

Figure 4-7 ADJACENT LOCALITY DATA
•
Select the Locality ID number for the Locality cur-
rently being defined.
•
Select a Locality ID for each of the closest Adjacent
Localities (0-15).
•
Select a Preference number for each Adjacent
Locality number as an alternative when leaving the
range of this Locality.
This Locality ID
Locality
Preference
# (Number)
Table 4-2 ADJACENT LOCALITY PARAMETERS
0-1023 This is the ID of the Locality currently being defined.
0-1023 The Locality ID number of a neighboring Locality.
1-15 A scale number for the best alternative Locality (1 = Highest, 15 = Lowest).
0-15 Choice of 16 neighboring Localities that can pick-up transmissions.

4.3.2 SELECT REPEATER

This menu selection has an equivalent icon in
the toolbar. This menu selection or icon se-
lects a repeater from the currently defined re-
peaters within this Locality (see Figure 4-8). Move the
cursor with the mouse to highlight the repeater filena-
me and double-click the mouse to open the Edit Param-
eters window.
Figure 4-8
4-3
LTR-Net PROGRAMMER
SELECT REPEATER
March 1999
Part No. 001-2009-600