Group Identification Calls; Alarm Forwarding To Switch - Viking 242-2009-632 Service Manual

900 mhz ltr-net 75w-160w repeater
Table of Contents

Advertisement

INTRODUCTION AND OPERATION
Unique IDs also permit individual mobile units to
be called using the special calls described in the pre-
ceding section. Calls can also be made to individual
transceivers using standard call Group IDs 1-239 if an
ID is assigned to only one transceiver.

1.15.3 GROUP IDENTIFICATION CALLS

The Group ID (1-239) is assigned to each LTR-
Net Home Repeater. A "standard" Group ID call is
accepted by a mobile if its Home Repeater and Group
ID are in the data message. A "special" calls are Tele-
phone Interconnect calls, UID calls and Directed
Group calls (Auxiliary calls). Telephone Interconnect
Calls are assigned a Token Group ID (240-247)
assigned by the repeater upon request from a mobile.
Telephone Interconnect calls, Unique ID calls and
Directed Group Calls all require the System and Sub-
scriber Manager/Call Processor to provide authoriza-
tion.

1.15.4 ALARM FORWARDING TO SWITCH

Repeater alarms are routed to the CIB (Channel
Interface Bus) to be detected by the Call Processor and
the System and Subscriber Manager.
March 1999
Part No. 001-2009-600
1-12

Advertisement

Table of Contents
loading

This manual is also suitable for:

242-2009-634

Table of Contents