Stainless Steel Or Aluminium Appliances - Zanussi ZOU20612XU User Manual

Hide thumbs Also See for ZOU20612XU:
Table of Contents

Advertisement

Clean all accessories after each use and let
them dry. Use a soft cloth with warm water and
a cleaning agent.
If you have nonstick accessories, do not clean
them using aggressive agents, sharp-edged
objects or a dishwasher. It can cause damage
to the nonstick coating.
STAINLESS STEEL OR ALUMINIUM
APPLIANCES
Clean the oven door with a damp cloth
or sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or
abrasive materials as they can damage
the oven surface. Clean the oven
control panel with the same
precautions.
CLEANING THE DOOR GASKET
Regularly do a check of the door gasket. The
door gasket is around the frame of the oven
cavity. Do not use the appliance if the door
gasket is damaged. Contact an Authorised
Service Centre.
To clean the door gasket, refer to the general
information about cleaning.
REMOVING THE SHELF SUPPORTS
To clean the oven, remove the shelf supports.
CAUTION! Be careful when you
remove the shelf supports.
1. Pull the front of the shelf support away from the
side wall.
2. Pull the rear end of the shelf support away from
the side wall and remove it.
1
Install the removed accessories in the opposite
sequence.
2
CLEANING THE OVEN DOOR
The oven door has two glass panels. You can
remove the oven door and the internal glass panel
to clean it.
The oven door may close if you try to
remove the internal glass panel before
you remove the oven door.
CAUTION! Do not use the oven
without the internal glass panel.
1. Open the door fully and hold the two door
hinges.
2. Lift and turn the levers on the two hinges.
3. Close the oven door halfway to the first
opening position. Then pull forward and remove
the door from its seat.
13

Advertisement

Table of Contents
loading

Table of Contents