Table of Contents
Advertisement
Before carrying out any maintenance, disconnect the appliance
•
from the power supply.
Ensure that the appliance is switched off before replacing the
•
lamp to avoid the possibility of electric shock.
Do not use a steam cleaner to clean the appliance.
•
Do not use harsh abrasive cleaners or sharp metal scrapers to
•
clean the glass door since they can scratch the surface, which
may result in shattering of the glass.
If the mains power supply cable is damaged, it must be
•
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf
•
support and then the rear end away from the side walls. Install
the shelf supports in the opposite sequence.
The means for disconnection must be incorporated in the fixed
•
wiring in accordance with the wiring rules.
SAFETY INSTRUCTIONS
INSTALLATION
WARNING! Only a qualified person
must install this appliance.
•
Remove all the packaging.
•
Do not install or use a damaged appliance.
•
Follow the installation instruction supplied with
the appliance.
•
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
•
Do not pull the appliance by the handle.
•
The kitchen cabinet and the recess must have
suitable dimensions.
•
Keep the minimum distance from the other
appliances and units.
•
Make sure that the appliance is installed below
and adjacent safe structures.
•
Parts of the appliance carry current. Close the
appliance with furniture to prevent touching the
dangerous parts.
•
The sides of the appliance must stay adjacent to
appliances or to units with the same height.
•
The appliance is equipped with an electric
cooling system. It must be operated with the
electric power supply.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
•
All electrical connections should be made by a
qualified electrician.
•
The appliance must be earthed.
•
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
•
Always use a correctly installed shockproof
socket.
•
Do not use multi-plug adapters and extension
cables.
•
Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
•
Do not let mains cables touch or come near the
appliance door, especially when the door is hot.
•
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
•
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
3
Advertisement
Table of Contents
