Specifications - Keysight Technologies E4412A Operating And Service Manual

1 Operation and Service Guide
These power sensors measure CW power, displayed on a compatible power
meter in logarithmic (dBm or dB) or linear (Watts or %) measurement
units. The E4413A is shipped with a 3.5- mm to Type- N adapter, part
number 08485- 60005.
The E4412A and E4413A power sensors are compatible ONLY with the newer E44XX-Series
N O T E
power meters. They are NOT compatible with the earlier 430-Series, E1416A, or 70100A
power meters.
The E4412A and E4413A power sensors are extremely static- sensitive. Do not open the
N O T E
power sensor unless you and the power sensor are at a static-free workstation.

Specifications

The specifications listed in
limits against which the power sensor may be tested. These specifications
are valid ONLY after proper calibration of the power meter. Refer to the
Calibration Procedure Using Keysight E- Series Power Sensors in the
E4418A or the Keysight E4419A Power Meter User's Guide.
4
Table 1 are the performance standards or
E4412A and E4413A Operating and Service Guide
