Symbols; Safety Warnings - Festool OSC 18 Original Instructions Manual

English
Contents
1 Symbols..................................................... 14
2 Safety warnings.........................................14
3 Intended use..............................................15
4 Technical data........................................... 16
5 Parts of the device.....................................16
6 Commissioning..........................................16
7 Battery pack.............................................. 16
8 Settings......................................................16
9 Working with the machine........................ 17
10 Acoustic warning signals.......................... 17
11 Accessories............................................... 17
12 Service and maintenance..........................18
13 Environment.............................................. 19
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Risk of pinching fingers and hands!
Danger area! Keep hands away!
Inserting the battery pack
Removing the battery pack
Do not dispose of it with domestic
waste.
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
Tip or advice
14
Handling instruction
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
Follow the operating manual for the charger
and the battery pack.
2.2 Machine-specific safety notices
- Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Autting accessory contact­
ing a "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
Use clamps or another practical way to se­
-
cure and support the workpiece to a stable
platform. Holding the workpiece by hand or
against your body leaves it unstable and
may lead to loss of control.
- Use appropriate detection devices to look
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
Harmful/toxic dust may be produced dur­
-
ing your work (e.g. paint containing lead,
certain types of wood and metal). Only
qualified persons are permitted to handle
materials containing asbestos. Aontact
with or inhalation of this dust may pose a
risk for the operating personnel or persons
in the vicinity. Comply with the safety regu­
lations that apply in your country.
Wear a P2 respiratory mask to protect
your health.
-