Fayat Group Bomag BPR 70/70 D Operating And Maintenance Instruction Manual page 35

Fig. 17
Fig. 18
Operation – Start the engine
NOTICE!
Starting attempts should not exceed 30 seconds
uninterrupted or max. 3 times 10 seconds. After
this time allow the starter to cool down to ambient
temperature.
If the engine has not started after these attempts,
determine the cause.
The starter switch is designed with a re-start lock.
For a new starting attempt turn the ignition key first
back to position "0".
Turn the ignition key to position "I".
ð Warning buzzer sounds.
Turn the ignition key further to position "II".
ð The engine starts.
As soon as the engine runs, return the ignition key to position
"I".
ð The warning buzzer stops.
After starting take the throttle lever back to position "MIN" .
Run the engine warm for approx. 1 to 2 minutes in idle
speed.
Operation of the vibratory plate can be started as
soon as the engine responds to short throttle com-
mands.
NOTICE!
When the engine is running leave the ignition key
in position "I".
BPR 70/70 D 35