ABB Relion 650 Series Installation Manual page 31

1MRK 514 014-UUS A
6. Tighten the screws.
7. Mount the IEDs with the rack mounting panels to the 19" rack.
8. Tighten the screws.
1
GUID-77659F5C-692A-4A14-BE37-623C09FCBF0C V1 EN-US
Figure 8:
A 8.82 inches (224 mm) + 0.47 inches (12 mm) with ring-lug connector 1 Screws
B 1 inches (25.5 mm)
C 19 inches (482.6 mm)
D 0.51 inches (13 mm)
E 10.47 inches, 6U (265.9 mm)
650 series
Installation manual
Two rack mounted IEDs side by side
Make sure that the lower venting holes in the IED is not obstructed.
Check the allowed minimum bending radius from the optical cable manufacturer.
© Copyright 2011 ABB. All rights reserved
Section 5
Mounting
25