Section 1
Introduction
•
The ^ character in front of an input or output signal name in the function block symbol given
for a function, indicates that the user can set an own signal name in PCM600.
•
The * character after an input or output signal name in the function block symbol given for a
function, indicates that the signal must be connected to another function block in the
application configuration to achieve a valid application configuration.
•
Dimensions are provided both in inches and mm. If it is not specifically mentioned then the
dimension is in mm.
10
© Copyright 2011 ABB. All rights reserved
1MRK 514 014-UUS A
650 series
Installation manual