Removing The Heat Sink And Cpu (Lc) - Fujitsu PRIMERGY CX25 0 M4 Series Disassembly And Recycling Document

1.3.8

Removing the heat sink and CPU (LC)

Tools: Phillips PH2 / (+) No. 2 screw driver
Recycling parts
2x CPUs, 2x CPU frames, 2x heat sinks, covers, 6x heat sink clamps, tubes,
several screws
Metal
Plastic
Printed circuit
Cables
Removing the LC heat sinks
Figure 77: Removing the memory modules covers and VRM heat sink covers
Ê Remove the memory modules covers (1) and the VRM heat sink covers (2).
CX400 M4
Disassembly and Recycling Instructions
Disassembly and recycling
61