Figure 3: Removing the CX2570 M4/M5 server node (B)
V
CAUTION
If the server node is difficult to pull out of the bay, push the server node
(1), and then pull the server node (4) while pushing the server node to
the left side (2, 3).
Removing server node dummy modules
Figure 4: Removing the server node dummy module
Ê Undo the locking mechanism (1) of the release lever and pull the server
node dummy module out of the bay (2).
Ê Disassembly the server nodes as described in section
server nodes" on page
CX400 M4
30.
Disassembly and Recycling Instructions
Disassembly and recycling
"Disassembly of the
11