Lucent Technologies CellPipe 60A User Manual page 59

you would like to use a black list and victim protection. You can also
set values for denial of service (DOS) attack block duration, scan
attack block duration, victim protection block duration, maximum TCP
open handshaking count, maximum ping count, and maximum ICMP
count. Set the values and click Apply.
To set up Policies, Triggers and Intrusion Detection settings
automatically, select a security level (none, high, medium, or low)
and then click on the Change Level button. This automatically sets
up values for firewall policy, firewall trigger and intrusion detection.
.
CellPipe® 60A/60A-BX User Guide 59