Scan Maintenance (Only For Mf Models) - Ricoh SP 330DN Service Manual

Maintenance Mode (for Four-line LCD Models)
Menu
5%-7%
8%-9%
10%-19%
20%-29%
Above 30%
Power On Count
Sleep Recover Count
Machine Series Number
Serial No
Inrush Control
Flicker Control

Scan Maintenance (Only for MF Models)

Menu
Mono Compression
Registration Adjust ADF Main Reg.
ADF Sub Reg.
Flatbed Main Reg.
Flatbed Sub Reg.
Size Adjust ADF Main Reg.
ADF Sub Reg.
M0C3/M0C4/M0C5/M0C6/M0C7
Displays the number of pages printed with coverage 5 to 7%.
Displays the number of pages printed with coverage 8 to 9%.
Displays the number of pages printed with coverage 10 to 19%.
Displays the number of pages printed with coverage 20 to 29%.
Displays the number of pages printed with coverage above 30%.
Displays the power on counter.
Displays the sleep recover counter.
DFU
Displays the machine series number.
DFU
Displays the machine serial No.
Sets the Inrush Control mode. When using with an external
power supply instead of a commercial power supply, set to "On".
[Off (Default)/ On]
Sets the Flicker Control mode.
[Off (Default)/ On]
Sets the monochrome compression type for scanning.
MH (Default)/ MR/ MMR
Adjusts the ADF Scan main-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
Adjusts the ADF Scan sub-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1mm/step]
Adjusts the Flatbed Scan main-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1mm/step]
Adjusts the Flatbed Scan sub-scan registration.
[-2.0 to 2.0 / 0 (Default)/ 0.1mm/step]
Adjusts the ADF Scan main-scan magnification.
[-0.9 to 0.9 / 0 (Default)/ 0.1 %/step]
Adjusts the ADF Scan sub-scan magnification.
5-8
Description
Description
SM