Table of Contents
Advertisement
Maintenance
9.7 Corrective maintenance
9.7.9
O-ring seal
If O-ring seals are present, you should check that they are in perfect condition and that the O-ring
seals are properly seated in the grooves between the components. Replace damaged O-ring
seals.
O-ring seals can be present on the following components, for instance:
• Adapters, tapers
• Entries, glands
• Bearing seals
• End shield seals
• Terminal box sealing
• etc.
106
Operating Instructions, 07/2020, A5E46712792A
1FU9
Advertisement
Table of Contents
