Configuration Steps For Time Synchronization Without A Central Time Master In A Windows Domain With A Hierarchy - Siemens SIMATIC PCS 7 Function Manual

Step
6
5.3.4 Configuration steps for time synchronization without a central time master in a
Windows domain with a hierarchy
Overview of configuration steps
The table below shows the configuration steps required for time synchronization without a
central time master in a Windows domain with a hierarchy, including a reference to the sections
of this documentation that provide a description of these steps:
Step
1
2
3
4
Time synchronization (V8.0)
Function Manual, 03/2012, A5E02779849-02
5.3 Overview of configuration steps, depending on the configuration
Time synchronization
components
AS
Components for time
synchronization
DC
PC
OS server
OS clients
Configuration steps
Parameter zing automation
systems
Configuration steps
Configuring domain
controllers as time masters
Configuring PCs without
WinCC time synchronization
via DCF 77
Configuring OS servers as
cooperative time masters
Configuring OS clients
Configuring time synchronization
Operating instructions in
section:
● "How to set time
synchronization on an AS
for SIMATIC mode
(Page 92)."
● " How to set time
synchronization on an AS
for NTP mode (Page 98)"
● "Configuring time
synchronization for the
SIMATIC PCS 7 BOX and
SIMATIC PCS 7 AS RTX
(Page 101)"
Operating instructions in section:
See Microsoft reference material
● "How to make DCF 77 Client
Service settings on a PC
station without OS (Page 84)"
● "How to set time
synchronization on an OS in a
domain without central time
master. (Page 78)"
55