Injection Unit 7Xt7100-0Ea00 For Panel Flush Mounting Or Cabinet Flush Mounting - Siemens SIPROTEC 4 7XT71 Manual

2.3 Injection Unit 7XT7100-0EA00 for Panel Flush Mounting or Cabinet
Flush Mounting
The housing is a sheet metal tube into which the pluggable circuit board assembly is inserted and fastened
using 2 screws.
On the front cover, 2 LEDs (RUN, ERROR) are located in the top part for signaling the device status.
The junction block with 18 screw terminals for external cabling and the protective grounding terminals are
located on the rear plate (see
NOTE
i
i
The 2 LEDs on the front cover and the 2 on the rear plate of the device have the same functions.
[le_front-view_flush-mounting-device_7XT71, 1, --_--]
Figure 2-2
(1) LED RUN
(2) LED ERROR
(3) Front cover
(4) Option plate
(5) Housing
(6) Name plate
SIPROTEC 4/5, Injection unit 7XT71, Manual
C53000-B1174-C128-8, Edition 05.2020

2.3 Injection Unit 7XT7100-0EA00 for Panel Flush Mounting or Cabinet Flush Mounting

Figure 2-1).

Injection Unit 7XT7100-0EA00 for Panel Flush Mounting or Cabinet Flush Mounting

Structure
15