Usage - Magicfx STADIUM SHOT Manual

CAUTION:
Always attach the tank properly with the fastening buttons!
Only work with an inspected and certified professional compressor with
an air output of no more than 8 bar. Carefully read the manual of the
compressor prior to use.
When the Stadium Shot is ready for use never leave the Stadium Shot,
the emergency button and the switch unattended!
Make sure that the surroundings of the Stadium Shot are free of people
or (moving) objects.
Keep at a safe distance from the public. The recommended distance is
at least 25m!
Never leave the tank under pressure for more than 15 minutes.
Regularly check to make sure the pressure in the tank is stable. The
pressure can rise through heat. Should this happen then immediately
open the venting valve and let the air escape until the pressure level
drops below 8 bar!
TekSet
Rental S.r.l.
|
Version 1.0
Page 16
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
STADIUM SHOT |
User documentation MAGICFX® Stadium Shot

11. USAGE

For using the Stadium Shot take the following steps:
1.
2.
Page 17
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
TIP:
Gives you suggestions and advice regarding easier or more
convenient ways to carry out certain tasks.
CAUTION:
The machine can be damaged, if you do not follow these procedures
carefully.
DANGER WARNING:
The MAGICFX® Stadium Shot may only be installed by adults and
authorised persons.
The Stadium Shot may only be operated if all parts are completely and
correctly installed/connected.
The Stadium Shot will release a shot as
soon as the magnetic valve is powered by
a 220V electricity source.
Take a 220V switch and make sure that
the electricity is switched off!
Then insert the plug into the socket of the
switch.
Press the switch to the on (ON) position
to enable the Stadium Shot to shoot.
Immediately after the shot press the
switch again to the off (OFF) position.
| RENT: CONFETTI |