Comba Telecom MRU-4500 User Manual page 65

Click to set band related information of RU.
Two parameters need to be set in this step.

RF Switch: Set the RF switch status of Remote Unit.

Target DL Output Power: Expected DL output power setting. Note: Rated output power of ComFlex
system is 30dBm, when Target DL Output Power is set less than 30dBm, software will auto adjust
RU gain to make the RU output power reach the expected Power.
ENU STATUS : 1-0-0
USER MANUAL FOR COMFLEX-5H00 1W2W
Figure 83: Commissioning Procedure – RU Setup
Figure 84: RU Frequency Band Table
Copyright - refer to title page Page 65