Firmware] - Comba Telecom MRU-4500 User Manual

5.2.3 [FIRMWARE]

There are two functions on the [Firmware] bar: [upgrade] and [swap]. [Upgrade] is used to upgrade
software, and [Swap] is to replace current firmware version to the previous one.
Follow steps shown in below figure to upgrade firmware.
Step1: select
device
Step 4: After clicking
ENU STATUS : 1-0-0
USER MANUAL FOR COMFLEX-5H00 1W2W
Step3: Click to
upgrade software
Figure 52: [Firmware] Screen - Upgade
, a window will pop up and click
Figure 53: [Firmware] Screen – Pop-up Window 1
Copyright - refer to title page
Step2: Click to
select software that
to be updated
.
Page 48