Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-2CE7 H0T-IT Series
Summary of Contents for HIKVISION DS-2CE7 H0T-IT Series
- Page 1 DS-2CE7xH0T-ITxxx Series Turret Cameras User Manual...
-
Page 2: Table Of Contents
Contents 1 Regulatory Information ..........3 1.1 FCC Information ..........3 1.2 FCC Conditions............ 3 1.3 EU Conformity Statement ........3 1.4 Industry Canada ICES-003 Compliance ..... 4 1.5 Warning............... 4 1.6 Safety Instruction..........4 1.6.1 Warnings ............ 4 1.6.2 Cautions ............. 5 1.6.3 Mark Description ........ -
Page 3: Regulatory Information
Thank you for purchasing our product. If there are any questions or requests, do not hesitate to contact the dealer. This manual applies to the models below: Type Model Type I Camera DS-2CE78H0T-IT3F DS-2CE76H0T-ITMF Type II Camera This manual may contain several technical mistakes or printing errors, and the content is subject to change without notice. -
Page 4: Industry Canada Ices-003 Compliance
2012/19/EU (WEEE Directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. -
Page 5: Cautions
Input voltage should meet both the SELV (Safety • Extra Low Voltage) and the Limited Power Source with 12 VDC according to the IEC60950-1 standard. Refer to technical specifications for detailed information. Do not connect multiple devices to one power •... -
Page 6: Introduction
2 Introduction 2.1 Main Product Features High Performance CMOS Sensor • OSD menu with Configurable Parameters • Smart IR • 3-Axis Adjustment • 2.2 Overview 2.2.1 Overview of Type I Camera Figure 1, Overview of Type I Camera Press and hold the switch button for five seconds to switch the video output. -
Page 7: Type I Camera Installation
three times the weight of the camera and the mount. If the wall is concrete, insert expansion bolts before installing the camera. If the wall is wood, use self- tapping screws to secure the camera. If the product does not function properly, contact your dealer or the nearest service center. - Page 8 Figure 5, Drill Template 5. Attach the mounting base to the ceiling, and secure it with supplied screws. For a concrete ceiling, first mount the expansion bolts. Figure 6, Attach the Mounting Base to the Ceiling 6. Route cables through the cable hole or the side opening.
-
Page 9: Ceiling/Wall Mounting With Junction Box
camera according to the figure below. Figure 8, 3-Axis Adjustment 3.1.2 Ceiling/Wall Mounting with Junction Box Before You Start You need to purchase a junction box in advance. 1. Paste the drill template where you want to install the camera. 2. - Page 10 Figure 10, Secure the Junction Box 6. Route the cables through the junction box’s bottom cable hole or side cable hole. 7. Attach the junction box cover to its body. 8. Attach the camera back to the mounting base, and secure it. Figure 11, Install the Camera Back 9.
-
Page 11: Type Ii Camera Installation
Figure 13, Finish the Installation 3.2 Type II Camera Installation 3.2.1 Ceiling/Wall Mounting without Junction Box Before You Start Ceiling mounting and wall mounting are similar. The following takes ceiling mounting as an example. 1. Disassemble the camera by loosening the screw. 2. - Page 12 4. Secure the mounting base onto the ceiling with supplied screws. Figure 2-20 Secure the Mounting Base to the Ceiling 5. Route the cables through the cable hole or the side opening. 6. Secure the camera on the mounting base. 1) Pull out the clip plate, and then combine the camera with the mounting base.
-
Page 13: Menu Description
Figure 16, 3-Axis Adjustment 4 Menu Description Please follow the steps below to call the menu. The actual display may vary with your camera model. 1. Connect the camera to the TVI DVR and the monitor, as shown below. Figure 17, Connection 2. -
Page 14: Video Format
Figure 18, Main Menu Overview 5. Click the direction arrow to control the camera. 1) Click up/down direction button to select the item. 2) Click Iris+ to confirm the selection. 3) Click left/right direction button to adjust the value of the selected item. 4.1 Video Format You can set the video format to 5 MP @ 20 fps, 4 MP @ 30 fps, 4 MP @ 25 fps, 2 MP @ 30 fps, or 2 MP @... -
Page 15: Exposure Mode
EXPOSURE EXPOSURE MODE GLOBAL SHUTTER AUTO BACK EXIT SAVE & EXIT Figure 19, Exposure 4.2.1 Exposure Mode You can set the Exposure Mode to Global, BLC, HLC, or DWDR. Global: The normal exposure mode, which performs • exposure according to the whole image brightness. BLC (Backlight Compensation): Compensates light •... -
Page 16: B&W (Black And White)
4.3.2 B&W (Black and White) The image is black and white all the time, and the IR Light will turn on in poor light conditions. You can turn on/off the IR Light and set the Smart IR value in this menu. DAY/NIGHT B&W MODE... -
Page 17: Video Settings
Smart IR: Adjusts the light to its most suitable • intensity and prevents the image from overexposure. The Smart IR value can be adjusted from 1 to 3. The higher the value, the more obvious the effect. D/N Threshold (Day to Night Threshold): Controls •... -
Page 18: Brightness
WHITE BALANCE MANUAL MODE R-GAIN B-GAIN BACK EXIT SAVE & EXIT Figure 23, Manual Mode 4.4.3 Brightness Brightness refers to the brightness of the image. You can set the brightness value to darken or brighten the image. The higher the value, the brighter the image. -
Page 19: Exit
4.6 Exit Move the cursor to Exit and click Iris+ to exit the menu without saving. 4.7 Save & Exit Move the cursor to Save & Exit, and click Iris+ to save the settings and exit the menu. UM DS-2CE7xH0T-ITxxx Series Turret 052020NA...