When The Following Messages Appear - JVC DLA-VS2200ZG Instructions Manual

Power is cut off suddenly
Check
Has "Off Timer" been configured?
The internal cooling fan emits a loud noise
Check
Is the exhaust vent blocked?
Is the unit used near a heater or air-
conditioner?
There are small black or colored dots on the screen
The D-ILA device is manufactured using high-precision technologies, but there may be some (less than 0.01%) missing
pixels or pixels that remain permanently lit. This is not a malfunction.

When the following messages appear...

Message
HDMI 1
No Input
HDMI 1
54
Set "Off Timer" to "Off".
Check the condition of installation.
Description
No device is connected to the input
0
terminal
The input terminal is connected but
0
there is no signal
A video signal that cannot be used with
this unit has been input (the names of
input terminals such as "HDMI 1" will be
displayed in yellow)
Action
Action
Input the video signals.
Input video signals that can be used.
Refer to
p. 41
Refer to
p. 17
Action