When The Following Messages Appear - JVC DLA-RS3000 Instructions Manual

When the Following Messages Appear...

Message
No Input
Out of Range
Lamp replacement
Back
72
Description
No device is connected to the input
0
terminal.
The input terminal is connected but
0
there is no signal.
The video signal input is not supported
on this unit.
Indicates that the lamp needs to be
replaced soon.
To clear the message, press the [BACK]
BACK button on the operation panel of the
projector unit or the remote control.
Action
Input the video signals.
Input video signals that can be used.
(P. 83)
Get ready a new lamp unit and replace
as soon as possible. Reset the lamp time
after replacing the lamp. (P. 64, 66)